Miyano sub spindle post

[Michael Reynolds]

does anyone know of a good tooootorial or anything to get me going on using mcam lathe to program this machine? Is there a post processer in mcam that supports it? Sounds like an amature question, but I have'nt done much with sub spindle work...

 

Thanks all!

Mike R.

[Guest CNC Apps Guy 1]

Call your local dealer and ask them for the new "MiscOps" C-Hook. This has Part Transfer, Sub Spindle Stuff. It is Kick @$$!!! It's still in Beta Testing but CNC Software is always looking for Beta Testers.

First you'll need to contact your dealer, then they'll tell you whou you need to contact at CNC Software.

Hope that helps.

------------------

James M.

[Michael Reynolds]

Thanks James! Someone e mailed me this file this morning, and I'm looking forward to playing with it (so to speak).

Thanks again!

Mike R.

[mats_asson]

This is great news! I am working on a post for our Index G200 machines. I would be very interested in this C-hook too.

[Guest CNC Apps Guy 1]

Just contact you local dealer, and they should be able to get you hooked up. Keep in mind it's in Beta Testing and your VALUABLE input is greatly appreciated by the kind folks at CNC Software.

------------------

James M.

[johnl]

I just got the Beta version. I have only one thing to say so far.

SWEEEEEEEEEEEET!

[Guest CNC Apps Guy 1]

......and Mastercam is only getting better! There's more where that came from too. Just be patient.

------------------

James M.