Mastercam 2023 VS 2024

[Jake L]

1 hour ago, jedeyelaser said:

also was told it still is a problem in 2025 as well and they have no clue when it will be corrected.

Is it a MC issue or a P+ issue?

[jedeyelaser]

18 hours ago, Jake L said:

Is it a MC issue or a P+ issue?

I assume its a Mastercam issue. its a problem with the planes and coordinates. when you try to select a point to probe it seems okay but the minute you click okay and are done with the probing programming, it chooses a what seems random coordinate and you cant fix it that I'm aware of. Pretty much rendering probing useless in Mastercam 2024 and 2025

[Jake L]

11 minutes ago, jedeyelaser said:

I assume its a Mastercam issue. its a problem with the planes and coordinates. when you try to select a point to probe it seems okay but the minute you click okay and are done with the probing programming, it chooses a what seems random coordinate and you cant fix it that I'm aware of. Pretty much rendering probing useless in Mastercam 2024 and 2025

Have you contacted anyone at ProductivityPlus? I am not familiar with the software but I would think it's an issue on their end not Mastercam. 

[jedeyelaser]

2 hours ago, Jake L said:

Have you contacted anyone at ProductivityPlus? I am not familiar with the software but I would think it's an issue on their end not Mastercam. 

No i have not, our mastercam seller said they have had another customer with the same problem and has put a ticket into mastercam for the problem.