Push Pull Function opening behing Parameters page

[Thee Cutterman]

Good Morning All

  I have just downloaded the latest update and have just come across this. When opening up the Parameters page the Push Pull functions seem to be opening up behind the page. In the video you can see that when i click parameters page (which will not show the window pop up due to the Snipping tool im using) the push pull graphics are in behind the parameters page. Has anyone else come across this or been caught out by it. Just want to make sure that it is not taking any changes while open. 

 

 

[Chally72]

What you're seeing is the Graphical Linking Planes added to all holemaking toolpaths in Mastercam 2024, which provide graphical push-pull planes for holemaking linking parameters. See the video below for information. The graphical plane is huge and is taking up your entire screen, which is why you get that blue tint and can't see what's going on. If you zoom out your view you'll see the plane. The plane is supposed to be sized so that it is slightly bigger than your hole size (if set to incremental) or hole set X and Y extents (if set to absolute). What is your hole selection here? 

Note if you don't want to interact with these planes, you can turn them off with the Graphical Elements toggle button in the top bar of the toolpath.
 

 

Here's another video from the rollout: 
 

 

[Thee Cutterman]

Thanks very much for the explanation and the attached videos Dylan.

Much appreciated

Cheers Darren