Multi Axis Pocketing

[TERRYH]

Does anyone have information on how to make this work ? Doing a check fixture with several staco clamps and trying to use this so I do not have to create individual work planes for each pocket. they are flat bottom just at different angles. 

[Aaron Eberhard]

In general, to make a multiaxis pocket work, you just need a single floor surface (so you'll choose the bottom of one of your pockets), and a containment/wall surface(s).   To make it work really well, you'll ideally have a volume to remove (such as a stock model), so it knows how high to start if it's above the walls for any reason, but it looks like your pockets are all pretty uniform depth, so you probably don't need to have a stock model there.