5 axis post dictionary needed..

[MetalFlake]

Well, Ive been humbled. Just reading over the mi and mr statements at the top of the MPGEN5X.pst has brought me to a screetching halt in tweaking the 5axis post for a Accramatic 950.

 

I did pretty well figuring out the tweaks I needed for the horizontal Makino cell and the Cincinatti horizontal so I'm not totally green when it comes to post 'stuff'.

 

Can someone please define for me:

 

Nutating (axis).

Primary axis.

Secondary axis.

Bias.

 

I know that I have a head-head application.

 

I better stop there.

 

 

Thanks big time for any and all help!!

 

MF

[DavidB]

Metalflake check your email.

I sent you the 5 axis Generic post .pps file all your answers are here.I just went threw the same questions you are raising.

 

Nutating head:Is Where the the actual spindle rotates.

 

Primary axis:Is the Main axis rotation.

Secondary axis:Is the axis that rotates on Primary.

 

 

HTH

[MetalFlake]

DavidB,

 

Most excellent! BUT. Could you please send to my work email?

 

[email protected]

 

Many thanks!!

 

MF

[DavidB]

Done.

 

[DavidB]

Metal,

 

The email I sent to your work returned to me because it was to large.

 

I will Zip it and try again.

[DavidB]

.Zip file returned also.

File is to large for your work email you will have it at your home email.

 

[DavidB]

Its on the FTP site in Folder. Text_&_post_files_&_misc.

 

That should help you

[Greg Williams]

David,

 

Nice aviator

 

"NOT"

 

[ 08-04-2004, 07:21 AM: Message edited by: Budgie ]