warning-milling is not enanble on SIM

[victor nguyen]

Hi!

I recently bough MC9.1 , I installed 2 CD as instruction and plus the key to usb port , then the only lathe software open , every time I open the mill I've alway got a warning as (Milling is not enable on SIM), Because the satuday I could not call my local mc9 software dealer .

If some one have a quick answere , I appreciated your helps , Once again Thank you in advance .

[Charles Davis]

Run the hasp9.exe and see what is authorized on the SIM.

 

If only Lathe is authorized, you need new codes, and only your dealer can take care of that.

[HevyMetl]

There is also a substantial jump in price if want to add the mill level 3 to the package. My boss bought lathe for the the other shop and choked when he got the quote for mill level 3, wire, and solids that I use over here.

[Camdude®]

Victor,

it could be that you recieved the wrong code from you dealer ( it happens ). if you run the hasp.exe as suggested by Mr. Davis then you will see what is authorized on the SIM. if it is only lathe and you have purchased mill as well then you'll have to contact your dealer to square things away.

[Tom Dorgan from American Precision]

Victor,

I am the one that refered you to Bryan @ MLC. You only purchased Lathe I am fairly certain. When you get the software they have all of it on the CD. You can only run the modules you have purchase. Check Bryan's business card if he gave you one. I believe his cell number is on it.

[victor nguyen]

Hi !

Thank you very much for your helps. I purchased both MIll , and lathe on MC 9.1 . I contacted my local dealer , running hasp9 utility , it showed that , the mill was mc 8.1 , the lathe 9.1 on the CD . So they gave me the new code update the software . It worked ok now

Once again thank you very much your support teams.