Programming a Mill/Turn machine

[tonala2004]

What's the easiest way to program an Integrex 300SY Mill/turn machine to perform both milling and turning operations.

Do I create a mill program and then a turning program and use any of them as a subprogram? or is there a way to create both within the same program.

Is there a place where I can get a post processor for the fusion 640 MT controller??

 

Please help

[Tim Aydt Prototek Engineering]

Program it all in lathe. May require a bit of training though.

[DavidB]

Welcome,

 

quote:

---

Is there a place where I can get a post processor for the fusion 640 MT controller??

---

Yes your Reseller.

 

In Mastercam Lathe you can turn and mill the part with 1 file making 1 program.

[Guest CNC Apps Guy 1]

To do what David said, you have ot have BOTH Lathe AND Mill on the SIM to accomplish this. I have used Lathe to do Mill-Turn parts many times. It works quite well.

 

HTH

[chris m]

HIJACK

 

What tool spindle do you have in that machine? If you have the C6 Capto spindle please contact me via email as I have a SCREAMIN' deal for you on some nearly-new [some actually new] tooling for your machine.

 

C