Save Settingd

[Jon Guck]

Is there a way in Mcam V8.1.1 to save some default settings? I would like to have my job setup screen / toolpath config have cetain boxes checked by either, running a macro to change the settings,or have the settings change by running a custom .OP8 file

I would also like to have cetain customized toolplanes loaded by the same method.

I have tried to record a macro to do both,but the key-strokes do not seem to record.

Thanks,

Jon

[Wallace]

Hi Jon,

In Version 8 (all and all 7):

In Screen - Configure - NC Settings - Operations Dafaults.

The file is .DF8

For open .DF8 in NC utilities - Def. Ops.

Or in Operations Manager -> Get from libray and select and import operation.

For Save operation in Operations Manager -> Save to library

[ 08-17-2001: Message edited by: Wallace ]