sample file in milling

[[email protected]]

hi guys

 

here im again in the second topic

 

say halloooooooooooooooooooooooooooooooooooooooo

 

 

well, i was wondring if anyone

can explaine to us - step by step -

(getting the image file , converting

it to lines , make the images lines the

guide of the toolpath , parameters of the

oprations , etc...) how can we do a sample

file from mastercams sample files ( spicaley

milling 3d machining (PROJECT TOOL PATH-M.MC9))?

 

and it would be helpful

[Psychomill]

Did or does your reseller offer any training for Mastercam? What you're asking (and from watching your previous posts) its going to take more than just simple answers online. I don't think this forum is an ideal place for 'training'.

 

JM2C..........

[cadist]

The topic has been covered alot. Just do a search on the forum. IMO go for wintopo. or view this JPG again

[[email protected]]

i done it

 

thank u cadist

 

 

 

 

[Psychomill]

+1 cadist... you understood where salem was going... I didn't. Doh!!!

[[email protected]]

dont minsion that we are frinds Psychomill

 

maybe i could not give clear q. and i feel happy when i find new reply speciale with these greate people here

 

 

thanks alot

 

[[email protected]]

what about these links and programmes

 

http://www.algolab.com/r2v.htm

http://www.softcover.com/

http://www.ablesw.com/r2v/

http://www.tenlinks.com/CAD/PRODUCTS/r2v.htm

http://www.siame.com/download.html

 

 

http://www.topshareware.com/Algolab-Raster...ransfer-420.htm