mastercam security device not found

[Pat-TGM]

Good morning All,

 

I haven't modified the post for few years. Last week I try to modify the post, but i get the message "errors were detected during posting, do you want to view the errors " click ok then access denied "mastercam security device not found"

 

I know i make something wrong in the post, but should bring up the message tell me what wrong.

 

I seached on the forum but no luck!

Can someone help me here

 

I run

Mastercam 9.1mr0105 (level 3)

Win Xp S2

Up to date hasp drivers

 

Thanks

Paul

[DavidB]

Number 1 rule when editing a post is make a backup or save the edited post with a differant name.

Make sure your c/planes are correct this will also coarse the erea you mentioned to be displayed when posting.

[DaveRyan]

is it possible that the post needs to be upgraded to 9.1 using the upgrade utility ?

[Pat-TGM]

I did upgraded to 9.1MR0105, But still get the same message.

 

Paul

[Bullines]

I think daveRyan was refering to the updatepst9.dll C-Hook in your Chooks subdirectory to update your post.

[Pat-TGM]

Yes I used updatepst9.dll C-Hook. No luck

 

I just want experimental myself so I download Mpmaster for V9.1 SP2 from this web. and try to modify and make some mistakes. I still get same problem