G54.2 (Dynamic Offset)

[DIARMUID]

Hi Guys

Do any of you guys know how an operator can use one program and rotate it a round say the likes of a tombstone using G54.2 dynamic offset.

Cheers D

[DavidB]

To run the same program on a different side of a tombstone you could use this.

 

MAIN PROGRAM

G90 G10 L2 P1 X.. Y.. Z.. B0 FIRST OP

M198 P1234

G90 G10 L2 P1 X.. Y.. Z B90 SECOND OP

M198 P1234

G90 G10 L2 P1 X.. Y.. Z.. B0 RESET ORIGIN

M30

 

HTH

 

[DIARMUID]

Thanks David

I think you may have sorted a problem for me.

Cheers