Haas Rotary axis post

[Jammer™]

I have an issue with my Haas rotary axis post.

 

I cut a row of 7 pockets (in x axis)and rotate that around a cylinder. I cut another row of 6 pockets 5.625 degrees off of the first row and rotate those as well. I am using transform rotate as my method and disabling posting on the original rows. Well it cuts the 7 pocket toolpath all the way around the part, and then rotates 5.625 degrees to start the 6 pocket rows and the thing cuts another row of 7 pockets on the 6 pocket row.

I posted a file on ftp called 20A-Oblong.Mc9

 

Any help will be greatly appreciated.....

[Eric S.]

Are you disabling theposting in the transform parameters or Right clicking on the opperation and selecting it manualy.

[Jammer™]

I am disabling the posting in the transform rotate parameters.

[Eric S.]

I tried it here and it looked ok

 

 

You have mail