Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Long time no see gents.
Using a Fine Bore op (bore to depth, shift, rapid out) it orients the tool parallel to the x axis but shifts in Y axis. I need it to shift in x axis. Is that possible?
That worked ok. It had all my parameters still set as I had wrote in MC which is good. Like you said I only had to rechain the geometry and it was done.
Thanks Tom.
Is it possible to write toolpaths in MC and then bring in to Solidworks with the toolpaths attached? I tried saving in MC as step and iges files and when I brought it in to SW the part came in fine but no toolpath. Have no issues with writing paths in SW and bringing directly into MC.
Thanks.
Right on Bill. If people would only read up a bit they might understand the war between the states started in 1861 because the south wanted to seceed and the emancipation proclamation which freed the slaves wasn't signed until 1863.
This causes the tool to retract to Z home position before returning to next cut. Not what I wanted. I just want Z to retract to the clearance or feed plane position then rotate the the A axis.
Running contours with rotary axis on and set to 3 axis rotating about the x axis I cut a feature and when it retracts to go to the next location it seems as the Z and A axis are moving simultaneously creating a ramp looking gouge in my parts. How can I get it to retract in Z before rotating A to go to next location?
TIA
Bill, I have worked with a lot of 4 axis in V9. If you would like to shoot me the file and a description of what you want to achieve I will be more than happy to look at it.
quote:
quote: --------------------------------------------------------------------------------
Somewhere in Kenya, a village is missing it's Idiot
--------------------------------------------------------------------------------
I think I found him in KY
quote:
I just bought a used fadal Communicating with it will be the least of your troubles.
The ony soultion I know of is something like this calmotion which it sounds like you already know that.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.