CATIA5 AND PRODRILL urgent!

[RAJ]

does anybody have any instructions on how to

process a catia file for prodrill to work i

cannot find in the help file how to do this

and i need to finish a mold with 1500 holes in it for monday morning.

 

i presently have a v4 model file to work with

but can get something else if needed any help would be appreciated

 

thanks

[Anbu Lingappan - Moldplus SA]

Hi

 

Please note that there is no feature recognition from CATIA V4 files. Therefore, no drill features (reamed and tapped holes) will be marked when importing the CATIA file. CATIA V5 files however will work.

 

You can still set the reamed and tapped holes using the Set Features functionality of ProDrill.

 

Any questions, please contact your local reseller or email the file to [email protected] with the type of drilling work that needs to be done. The more the information, the better. Also, if you did review the ProDrill Quick Start Guide, you should be able to use the software to give you the results you want.

 

Regards

[RAJ]

ftp://mastercam:[email protected]/Ma...rill%20problem/

 

file is in this location if anyone can help,problem is it will not recognise all .1875 dia drill holes it missis some!

this is a v4 model file i am waiting for codes for catread v5 which i should get early next week