help with blending surfaces

[MATT Q]

Hello all,

I'm running into a problem with a mold design I'm doing. I need to transition from draft surfaces to the mold plate (red surfaces) and it needs to be a 1" radius can anyone look at this file and give me some hints on how to do this. I'm running version 9.1sp2 no solids. The file is in the version 9 folder under variplume_core_xs.zip. Thanks in advance and this place rocks.

[betts]

Did you have the file set as read only or something?

[betts]

Ok its not set read only, but it is defaulting to a bunch of version 8 crap?????????????

[MATT Q]

I don't think so is it giving you problems?

[MATT Q]

Whoa I don't know what that is all about. Want me to try it again and do something different?

[Müřlıń®]

Make your pl offset spline chainable first, none of them connect. Then do creat/surface/fillet surface/curve....otherwisw do them one-at-a-time..

[MATT Q]

thanks guys that worked I had to do one at a time like you said Murlin little time consuming but looks good. Learn something new everyday. I owe you one