NEED HELP

[KEVCAM]

I'm trying to make a point grid conisisting of a thousand or so grid point conatained with a 13" diameter arc. Each point is equally spaced 0.275" from each other. I was succesful creating the point grid, however , how can you create arcs by selecting multiple point positions. For example can you create multiple arcs by windowing in on the point grid????

 

Need imediate help.

The boss needs this by 4:30

help.

[chad fisher]

i dont know how many you want in the along or the across, but try creating the acr and point then going to x form then translate then enter the amount of copies

[AndyA]

Kevcam,

Try using the chook gridpock.dll. This creates points and arc inside of a pocket that you chain. Mess around with it and see if it gives you what you want.

Andy

[Allan Brown]

If you already have the points, use the PTS2ARCS.DLL C-Hook.

[BernieT]

download this c-hook:

http://www.emastercam.com/tools/chooks/dow...v7/pts2arcs.zip

It will put circles around existing points.

[cadcam]

After looking at what you want and doing it, you want to go with Andya thought fast and to the point.

[ 10-03-2001: Message edited by: cadcam ]