SP1 Post Question

[MLewis]

if drillcyc <> 9, # Don't output spindle if tool pin check

[

[MLewis]

Try it again. I have a custom cycle in my post to perform a tool pin check. At the start of the program I check to see if this cycle is the first operation and don't turn the spindle speed on if it is. The code worked until SP1. Any help would be greatly appreciated!!!

 

Here's the code

if drillcyc <> 9, # Don't output spindle

[

#spindle code

]

 

Thanks,

[Jim Evans from CNC Software]

Mike,

 

Send the files to [email protected]. HArd to say what is causing the problem without debugging the whole post.

 

Use the Zip2Go utility so we get the MD/CD as well.