toolpath display

[Rick46]

Is there a way to tun the toolpath display off after tool path creation or regeneration after path is no longer being used or worked with.. this get very annoying when you have 20 toolpaths and 8 of them are displayed . cant figure out which one is on and which isnt...just wanting to disable this all together unless I select to display the path..like it is in Ver. 9...thanks..

[Guest]

try alt + T

 

that toggles the tool paths on and off

[Rick46]

ty...

[Rick46]

well I thought that fixed but it didnt.. I still haev to go and select the tool path thats being displayed to turn it off.. it wont just turn the diplay off all together..for all toolpaths...

[crazy^millman]

You can hit the control key then left mouse click on the toolpath and turn off the display in V9. In X you want to use the squiggly line icon to turn off toolpaths when selected by shift or control in the toolpath manager.

 

 

Also you can right click in the toolpath manager in V9 and go to options and then go to toolpath display and turn them on and off there. THIS FEATURE I MISS IN X!!!!!!!!!!!!!!

[beej]

I'm not crazy about the toolpath display either. when you pick a path to display, it displays all of them except for the one you just picked. then you have to select all the paths to turn them off and then turn the one path on again. (not sure if I just got that right but I do know that I never get what I want with that button)

[Rick46]

quote Also you can right click in the toolpath manager in V9 and go to options and then go to toolpath display and turn them on and off there. THIS FEATURE I MISS IN X!!!!!!!!!!!!!! /quote

 

 

I miss that too crazy^millman

[NITIN W]

atl + T works fine for toggle off and on of Tool path.

[Richard Thomas - Mastercam UK]

Alt + T will work to turn off/on all toolpath displays... *if* your mouse is over in the graphics area.

 

Alt + T does not work, if your mouse is over the Operations Manager (you can use T then, but it only applies to the selected operations)