Result Color Selection

[ILv2Rk]

Can someone tell me how to use your result color as a selection for geometry. In V9 when transforming u could pick your "result" for geometry selection as long as it was still highlighted; such as xform/translate/result.

Is this possible in X, so far I haven't found a way to do it.

Jeff

[Guest]

Jeff there is a thread floating around here about a result c-hook available on the FTP.

 

Do a search and check it out

 

Here you go

 

Linky

[ILv2Rk]

Thanx John,

I tried to find it on the ftp site in the c-hooks folder but it is not there.

Jeff

[beej]

Jeff

you've got mail

[HevyMetl]

Well looks like I got beat to the punch. Jeff you may have a couple of messages there.

[Roger Martin from CNC Software]

Using the std. system method to select the Result entities.

 

Click on the ALL button in the General Selection toolbar and...

 

Click on 'Xform Result' and then the green check (OK) button to dismiss the Select All dialog.

or

Double-Click on 'Xform Result'

[DavidB]

quote:

---

Double-Click on 'Xform Result'

---

Cool Thanks. Works for all things in the "ALL" dialog box.

[ILv2Rk]

Thanks for the quick response guys, I had many to choose from. I have seen some people complain about this forum, (ie.. kota/professionalism thread ) what a joke, but I personaly think this is the greatest. When I call up my re-seller for an answer to a question, it may be a day or two b4 they get ahold of CNC Softwares and back to me w/an answer. I post the same question here and I get an imeadiate response. Where else can u go 2 get help from 1000's of people instantainiously. People helping people. what a concept!!