Post altering...

[Guest]

The last 2 lines (before an M0, M1, or M30) are the lines listed below. I want to annex those 2 completly. Any thoughts on how?

 

G91 G28 Z0. M9

G28 X0. Y0. A0.

[john316]

.

 

If, when you say annex, you mean to bypass, insert a # symbol in front of them and they will be ignored.

 

.

[Guest]

Those will send your machine home to tool change or end the program, are you going to replace them with something else?

 

John is correct a # in front will do it.

[Guest]

There is no string for that that I can find. I had just figured it was in a variable somewhere?

[Psychomill]

What post are you using?

 

Normally, you'll find them under ptlchg, pretract, or peof.

 

Of course, by "annex" I think you're looking to "add" these lines to your post? So, you need something like this?:

 

pbld, n, "G28", "X0.", "Y0.", protretinc, e

 

(This is a postline from MPMaster in the peof. This doesn't post "exactly" as you have written but that can be tweaked).

 

[Guest]

Apparently someone here at work tells me I am a dumb Canuk. I was meaning annex as 'to be removed'.

 

I have those lines in my program at the end of every cycle, just before the M1, M30 or similar. I don't like them. I don't use them (until the end of the program - which I have added to my post).

 

The post I am using is one that I have hacked up and spit out (with help from other forum members -you know who you are). So it is somewhat custom now. =] What I call MPHAAS.PST

[Guest]

Without testing it I think in the ptlptlchg, pretract, placing the # in front of the offending lines with take care of it but you may need to add the retract info you do want into the peof section since it will not read it in the pretract section.

 

 

I have your post at home if you don't get it ironed out today I'll look at it tonight.

[Guest]

That did exactly as I needed thanks John (and all else).

 

John, why would my post not have a ptlptlchg? It had the pretract but not the other...

[Guest]

quote:

---

ptlptlchg

---

Probably because that was a typo on my part, should've been ptlchg.

 

As long as your good to go.