Rast2vec in X

[John Giess]

Is the Rast2vec function still available in version X? I checked the V9 to X documentation and could not find anything.

Thanks

John

[ajmer]

it is a c-hook rast2vec.dll

[John Giess]

Thanks

[Guest]

That CHook asks for an access code...what's up with that?

[John Giess]

Same problem here with the access code!!!

[John13]

rast2vec is an add-on. Did you have it with a previous version?

[John Giess]

Yes

I even see it under installed products in the help- about - pull down menus!!

[John Giess]

Yes

I even see it under installed products in the help- about - pull down menus!!

[John Giess]

I called tech support on this. They mentioned that they have had problems when using this with mill. I found that I needed to do an update on my maintenance code (not sure why it was not up to date). If you are have problems check your date by going to - help- about - and see the listed date. After I updated the code Rast2vec worked fine in mill and router