HELP IMMEDIATELY !

[RANDYS.]

TO SCOTT BOND,

I'M RANDY SMITH A FEW YEARS AGO YOU STOP BY MY

WORK PLACE, TO GIVE ME TIPS ON PROGRAMMING ON

MASTERCAM, BUT NOW WITH MY MEDICAL CONDITION

I'M IN A WHEELCHAIR NOW AFTER MY ACCIDENT, SO

NOW I CAN'T STAND AT THE CONTROLS ANYMORE, SO

NOW I HAVE TO SIT IN CHAIR TO WORK NOW,I NEED YOUR HELP BECAUSE I'M HALFWAY INTO PROGRAMMING.

I HOPE THIS IS SCOTT BOND I MET.

THANK YOU

RANDY SMITH

[cadcam]

Randy there is only my broter inlaw scott bond out here in this area.

So there is a good chance this is him.

What may i ask do you need help with sir?

Randy i sent this page to scott,so in the morning when he gets to work he will come and see this.

Have a good night

[ 11-09-2001: Message edited by: cadcam ]

[Scott Bond]

Hi Randy S.

I am the one.

You are in the right place.The wisdom of all the Forum members will be enough to overcome any Mastercam project.

If anything can go right it will at the best possible moment.

[ 11-09-2001: Message edited by: Scott Bond ]