solids manipulations

[loraxian]

I do an exercise with students where they import a 2 X 2 cube with the words Top Front and Side extruded on three sides. The idea is that they reposition the part using the tools available within Mcam so that Top faces up ect. etc.

 

I know how to do it with the software we used previously but I'm unsure of the most efficient way to do it with McamX. I'm sure it would make sense to do it a couple of different ways but which is the most effecient? I usually use WCS.

 

Thanks

[Guest]

Transform >> Translate 3D >> between views >> from front to top.

 

one way of doing it