collant end on drill cycle.

[medaq]

Atm when I do coolant through tools, The machine cancels the coolant on the same line as the g80. And for some reason does not run the cycle to clear the coolant out of the head. So atm it posts like this.

 

G80 M152

 

How do I space the coolant end line to be like.

 

G80

M152

 

Thanks in advance.

 

Jim

[Guest]

Jim,

 

Go into your pcanceldc$ section and change it like this

 

if drillcyc$ < 8, pcan1, pbld, n$, "G80", e$

pbld, n$, scoolant, strcantext, e$

 

See if that works for you.

BTW, that change will give it to you on all of the G80 lines, if that's ok.

 

Back up your post before making any changes

[?Mark]

Jim,

Out of curiosity, what do you mean by this:

quote:

---

does not run the cycle to clear the coolant out of the head.

---

Mark

[Lucky]

He is probably referring to an airblast cycle to blow out the lines preventing the embarassment of dribbling all over the place.

[?Mark]

You mean running air thru coolant lines?

 

Mark

[medaq]

Mark, I made a m code (m152) To be like a m9 coolant off, Cept It will air blast the center of the tool, then dwell 5 seconds.

 

And Jmparis, Thanks again, you are a big help on these boards..

 

Jim

[Guest]

 

Thanks