other MR1 errors

[Guest]

Dave,

 

So you're saying the tweaks we've been running since SP1 in the plinout section, should now be removed.

 

Like Mark I checked mine and they seem OK

 

If you feel it's better to have them gone then I'll remove them.

[spade117]

quote:

---

Is this a post that was originally updated from 9 you could try to re-update your old mc9 post to see if it works right.

 

You might just rename it as test or something and give it a try. that way it doesn't over right your current machine and control definition.

---

I tried this and it didn't fix the problem.

[spade117]

quote:

---

Any of the those work arounds should be removed from your post. Also, check the control def's tolerances for NC precision. It looks like values to match your post's format statements are in order. Like .0001" for inch, .001mm for metric.

---

they seem to be correct.

[?Mark]

quote:

---

If you feel it's better to have them gone then I'll remove them.

---

+1

I'm staying put until Dave confirms it...