Studio in X

[Todd Wertz]

Hi all! Please forgive me if this has already been covered. I've searched and couldn't find it. Does X have Studio. We send out 90 percent of our designs as jpgs from studio. This allows me to change the background to white in a matter of seconds: without changing the default values. Please advise.

 

Thanks

[Doug Nemeth CNC Software Sales]

Hi Todd-

 

Unfortunately, the studio setting were all removed for X. I'm trying to think of a workaround for you, but I'm not coming up with much. I'll keep trying!

 

Doug

[Todd Wertz]

I can change the background to white and go to Screen/Copy Screen Image to Clipboard. Next, I go to our Paint Shop Pro program and past as new image. Then I save the image as a .jpg.

[Doug Nemeth CNC Software Sales]

Todd-

 

You may want to consider the setup sheet that Andreas has a download for a few topics down; X+ for vX MR1 / SP2. It has the ability to take a screen shot with a white background, and outputs it as a HTML, with other good info.

 

I just tried it and it looks good!

[Roger Peterson]

Studio is missed by many, this exact scenario has come up several times. There are some really good screen capture softwares out there for very nominal prices ($10 to $100) including snag it and I something by Jasc I beleive (Jasc software writes paint). And there are several free ones that don't give you as much but are free. Most of these have the ability to swap colors (white for black for example). This done not replace studio but it will do what you want it to do. I don't use these softwares much but I'm sure if you ask that many people here are using them and will give some feedback.

 

 

HTH

[Todd Wertz]

Doug, I tried to download it, but it says invalid archive. What did you use to open it?

[Todd Wertz]

Never mind: I got the link lower in the topic.