Transforming a Drill Toolpath

[Namliek_J@TheeCircle™]

When I transform a drilling toolpath around the outside of my cylinder using the rotate, a little box pops up that says:

 

Op View and NCI View

Tool Plane in operation does not match its 1014 line!

ID #38 , Drill/Counterbore

 

and then I get another that says the same thing but is changed to:

 

Op View and NCI View

Construction plane in operation does not match its 1017 line!

ID #38 Drill/Counterbore

 

What does this mean? How do I fix it?

[Guest]

Make sure your toolpath plane is set to top.

 

In the transform parameters, rotate about make sure if you rotary head is along the x axis to have it set to rotate aound the right view.

 

HTH

[Namliek_J@TheeCircle™]

It is all set up that way

[Namliek_J@TheeCircle™]

I ran the program anyways and it worked just fine. Thanks for the help.

[kkominiarek]

I have this issue for the first time ever.

 

>>>

Op View and NCI View

Tool Plane in operation does not match its 1014 line!

ID #38 , Drill/Counterbore

>>>

 

Has there been a fix found yet? Or does anyone know what causes this issue?

 

Also this error happens at 1 workstation and not another.(using same MCX.file, both WS running same ver of MC)