Post question

[tlarue]

Does anyone have a list of the variables from mastercam. I am not sure if they are called variables. eg. tldia,tlngnote

[Guest]

The V9 Post reference guide is handy to have.

 

but many variables, like the ones you listed are created in the post itself. In X if it doesn't have a $ after it it is not a system variable and was created within the post

 

So no many of them may not be documented and you might have to figure out what it does or ask if some one knows.

 

Are you looking for something specific or just looking for reference material

[tlarue]

Where can I get the V9 post reference guide

[Guest]

Your reseller would be the first place to check

 

[cadcam]

[Guest]

Jay, there is a lot of information in there but I think it still pales in what is available on the CD.

 

But if you're just digging in, yeah, good place to start.

 

 

BTW, if you installed MR1 over your SP1 previous install, the pdf may not be in the directory, it is available on CNC website

 

Mastercam Documentation page