tlarue
-
Posts
19 -
Joined
-
Last visited
tlarue's Achievements
-
I need help with this toolpath. I assume it should have a larger step down on the steep areas and a smaller step over on the shallow areas. Look at the pic. Im getting strange results. I would go to my reseller if they would call me back. Thank you for any help. Presentation1.pdf
-
I am importing geometry into and existing MC file. The level names I currently have get over written by the import.
-
Whenever I import dwg files, my level names change to the levels names on the dwg. Does anyone know how to stop this.
-
Lathe Roughing Question
tlarue replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
Take a look at the tool definition. If the spindle is running the wrong direction it will give you alot of errors. -
Where can I get the V9 post reference guide
-
Does anyone have a list of the variables from mastercam. I am not sure if they are called variables. eg. tldia,tlngnote
-
We have four integrated tombstones for Makino A77. 3 are unfinished if anyone is interested
-
Can someone give an example of forcing a line number
-
When I use cutter comp in control I am having a problem with the program creating arcs in corners that are smaller than my tool. I keep getting CRC error. Can anyone help me with this.
-
I want my post to post out G00 X30. Y30. berfore each tool change. It currently posts out G00 X10. Y10. I can change it in the operation but I don't want to do that for every program.
-
I am trying to set up my defaults for a lathe. I start with lathe_inch and all of the operations are mill toolpaths. Does anyone have any suggestions.
-
I am trying to set the default home position for an Okuma lathe. I found a place to change it in the operation but I do not want to do that every time. Can someone please let me know how to change it in the machine definition.
-
I have been programming in wear for a number of years and I started at a new shop and the machinists want me to program with cutter comp. in control. Is there any real problems with this? what do you guys program in?
-
I need version X
-
Does anyone have a sample tombstone program. I have improvised several times and would like to lurn the right way to program on a tombstone with work on multiple sides.