tlarue
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by tlarue
-
I need help with this toolpath. I assume it should have a larger step down on the steep areas and a smaller step over on the shallow areas. Look at the pic. Im getting strange results. I would go to my reseller if they would call me back. Thank you for any help. Presentation1.pdf
-
I am importing geometry into and existing MC file. The level names I currently have get over written by the import.
-
Whenever I import dwg files, my level names change to the levels names on the dwg. Does anyone know how to stop this.
-
Lathe Roughing Question
tlarue replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
Take a look at the tool definition. If the spindle is running the wrong direction it will give you alot of errors. -
Where can I get the V9 post reference guide
-
Does anyone have a list of the variables from mastercam. I am not sure if they are called variables. eg. tldia,tlngnote
-
We have four integrated tombstones for Makino A77. 3 are unfinished if anyone is interested
-
Can someone give an example of forcing a line number
-
When I use cutter comp in control I am having a problem with the program creating arcs in corners that are smaller than my tool. I keep getting CRC error. Can anyone help me with this.
-
I want my post to post out G00 X30. Y30. berfore each tool change. It currently posts out G00 X10. Y10. I can change it in the operation but I don't want to do that for every program.
-
I am trying to set up my defaults for a lathe. I start with lathe_inch and all of the operations are mill toolpaths. Does anyone have any suggestions.
-
I am trying to set the default home position for an Okuma lathe. I found a place to change it in the operation but I do not want to do that every time. Can someone please let me know how to change it in the machine definition.
-
I have been programming in wear for a number of years and I started at a new shop and the machinists want me to program with cutter comp. in control. Is there any real problems with this? what do you guys program in?
-
I need version X
-
Does anyone have a sample tombstone program. I have improvised several times and would like to lurn the right way to program on a tombstone with work on multiple sides.
-
The parts we are working on are used in the chemical pump industry. We are getting through with cobalt drill but we have to resharp the drill about every inch. I contacted siem tool and they will make a through coolant carbide drill for this application. To make it worse these parts are cast. Thank you for the help.
-
I have been modifying my posts for some time and am interested in learning more about how the post works with Mastercam and what all of the codes are. Does anyone have any idea where I can get a book of something?
-
I have tried Guhring series #617 and #618. I ran 15 sfm and .0025/rev. They break within the first 1/2".
-
I am new to this forum. I have been using Mastercam for about 8 years. I am drilling 1/4 holes 5.5" deep in hastaloy B and hastaloy C. Can anyone recommend a good drill for this application? Thank you