X View Manager

[Jim at Gentex]

I created some different user defined custom views / tplanes to try several approaches to machine a certain part, and eventually got what I wanted. My problem now is that my view manager is filled with multiple views / planes that I DON'T want. I can't find anything in the help section on how to delete these unwanted views to simplify the view manager to show only the views I want.

 

Can anyone shed some light?

[Guest]

In the view manager Jim, as long as there are not toolpaths associated with them you should be able to right click on it and click delete.

[Jim at Gentex]

The 'View Selection' window doesn't give any right click options.

Am I not looking in the right place?

[gcode]

Click WCS in the bottom right corner of the screen

[Jim at Gentex]

Found it!

 

Thanks, John. I was looking in the wrong place!

[dwsz71]

You should be able to just high-light (select) them then hit the delete key on the keyboard.

 

HTH

[Jim at Gentex]

Thanks G.

 

Sometimes ya just gotta say "DUH"!

 

Still learning...

[PeterM]

I am observing something that may be associated with Jim's issue. In the lower toolbar, are gview and plane buttons, if I go to planes, named, and click on a named view a window opens to save my NEW view. Well I already have the view that I named and just tried to select. If I don't exit out of that function a new view is saved into the view manager, I ended up with a lot of usless new views before I caught on to this. The only way that I can change my plane while being in another view is to go to the view manager and select my desired view from there. I believe that this is a new bug, as this didn't happen before mr1. Peter, x-mr1