Who cut the shark !!!!

[nickelback]

That is the coolest thing I've ever seen. Is the machining center 3-axis? Is there a way I can get the geometry to cut one myself. Can you give me some information on how to go about cutting one?

[cadcam]

Hi Sir ,

you can get the geo off the FTP.

It is called shark.zip in the MC8 folder.

have a great holiday.

[masspfei]

At which ftp site are you refering?

[cadcam]

go to the top of this forum and look at the FTP info.

this will give you a link and info on this FTP for this forum sir.

If you should have any troubles please contact me.

[P_Scott]

Here's a GIF of the shark that was "knitted" into solids in V9,b3, colored and animated with PS pro v7. I don't know how to show it on the forum page but you can copy it from the cadcam FTP site. It is located in the "All jpeg, gif, photos..." folder as Shark1.gif. Have fun and enjoy the holidays.

[cadcam]

That is great.

Good job petter scott.

the man with to much time.

[Bob B]

cadcam- are you saying that peter scott has too much time on his hands?-he's not the one with over 1200 posts!!!

[cadcam]

Excuss me Bob that is 1218 posts now.

Me to much time? Never.

Just trying to help and have some fun at the same time.

Now arent you a junior member if i recall?

I think you need a few more posts. J/K

Have a great new year.

[P_Scott]

You're all welcome. Whether I have too much time on my hands or not is my concern. At least I don't reply to every single forum topic as some do. No need to name names. It really didn't take me too much time though, once I knew how to do it. Just thought I'd contribute to the holiday spirit and forum conversations. The real time consuming bit must have been creating the shark in the first place. Hats off to those who do all the hard work and don't get the proper recognition for it.