Set up sheet note

[Guest]

This is GOING to come up.

 

If you are using the fixedsetupsheet.dll you will likely need to change it to the .set in your config

 

settings >> configure >> toolpaths

 

or your setup sheet will likely not trigger.

[Pete Rimkus from CNC Software Inc.]

John,

Good thinking.

There is no need for FixedSetupSheet.Dll in MR2.

[Guest]

:bump:

[jctjct]

Thanks John. This thread saved me some time and digging.

[jctjct]

Since updating to MR@ my setup sheet is triggering and working like it did, however the program name keeps coming up as "NC GROUP" everytime, regardles of what I set the NC File name to. I remebering this happening when I first transitioned to X, and was solved by changing the file name in the Files tab under properties in the ops manager. Anyone else having this problem?

[Guest]

Yes, I wound up going into config >> toolpath manager and using the toolpath group as the driving of my .nc file name

[jctjct]

That did it. Thanks again John.