Agie Revisited

[Nathan G. Baldwin]

From the former...

Agie Thread

 

Still having problems with this machine.

 

The txt File below is an output from the current post, which appears correct

 

The file is for a 10 MM circle, threaded at 0,0 (the center of the arc) and chained from the vertical quadrant. 1mm tab, one rough with tab cut.

No comp.

 

%N000 D01 P01 T01 G43

N001 G03 X+005000 Y-005000 J-005000G44

N002 G01 X+000000 Y+005000G40

N003 G03 X-004007 Y+004900 I-005000G44

N004 G03 X-000993 Y+000100 I-000993 J-004900G44

/N005G40M00

N006 G01 X-001000

N007 G01 X+000000 Y-005000G40

N008G45M21M02

 

After the Tab, the machine should return to 0,0. What the machine is doing is moving to x 000100 and y-000008

at first look, I believed the machine was ignoring line n004 but the machine does cut that arc.

Is this a comp issue and how is comp assigned and cancelled within this old agiecode? If not, what could it be?