TWIN SPINDLE

[Guest]

IS THERE ANYBODY KNOWS HOW TO PROGRAM TWIN SPINDLE,DOUBLE SIDE TOOLING TURRET LATHE IN MASTERCAM 9 OR X ? ANYHELP WILL BE APPRECIATED. THANK YOU.

[Hardmill]

Look at your sample files, they should give you a good idea

on how to setup your bottom turret.

 

 

PEACE

[NITIN W]

Just define your machine as per what it is actualy in MDF and CDF

[Brandon Walker]

make sure you put the correct tool on the correct turret in the correct orientation (can get a bit confusing), make sure if you have any extended tools on either turret that you have a safe home, and toolchange location for each, and make sure your stock and spindles are properly setup. Everything depending on whether your machine is defined properly as well...

[Brandon Walker]

oh and id highly recommend using the levels manager for your part transfer and subspindle geometry/solid/wireframe/whatever youre using. different colored geometry would maybe make it a bit less confusing (if necessary)