Toolpath Groups-Help

[Greg Williams]

I have a large program with 20 groups of toolpaths in it, My problem is that when I post process the program I get 20 Small programs with different names(the name comes out the same as the name that I have given to the toolpath group), What I want is one big program. I have tried deleting the NCI file and reprocessing but this deosn't work.

This seems like a very handy feature but I just wish I knew how to turn it on and off

Cheers

Greg

[KMaynard]

Sounds like your NCI files have been broken up into different sets .. Go to your operations manage check all toolpaths right click options>change nci destinations ..

Hope this helps ..

Kev

[Ketil]

Hello Greg !

I allways put all toolpats that i want in the same

program, in the same operation group, then you can pick the hole grup, just one or as many as you like by marking the toolpats you want`s in the program.

[Guest CNC Apps Guy 1]

The setting lies in your configuration. Go to Screen, Configure, NC Settings tab, click on the NCI Path button, set the first operation to when you want to be prompted for the path, then the second selection should either be Current MC8 filename or Last Created Operation. Active Operatin's Groupname is what it is currently set at.

Hope that helps.

[Greg Williams]

Changing the NCI path fixed the problem, And changing the settings in screen configure file has stopped it happening again. A big thank you to you guys for helping me out.

Cheers

Greg