Aggie Wire Post Help

[Mike Gates from Barefoot CNC]

I am looking for some help with an Agie Wire post for X. I have updated post from 9 which worked fine. But now I am getting alarms. Not sure what's going on. Tried new Agie post that comes with X and it does same thing. See example below.

 

% N100 M63

N110 G01 X+676500 Y-200666 G40

N120 D01 S101 T00 Q+000000 G43

S REGISTER TOO HIGH ****************here

T REGISTER TOO LOW ****************here

N130 G01 X+000000 Y+200666 G44

N140 G01 X-020000 Y+000000 G40

 

Thanks for any and all help.

[Don S at Barefoot CNC South]

Mike

Is today wire day here send me what ya got I will look at it.

[mc_91]

just try it like this:

 

% N100 M63

N110 G01 X+676500 Y-200666 G40

N120 D01 S01 T01 Q+000000 G43

N130 G01 X+000000 Y+200666 G44

N140 G01 X-020000 Y+000000 G40

 

some editing by hand...

 

it works fine for me.

[Mike Gates from Barefoot CNC]

Hey Don,

 

You have mail. Thanks.

[Guest]

mike,can't you just change those numbers in your power library.

[Mike Gates from Barefoot CNC]

Don helped me get it straightened out. Thanks guy's for the help.