Toolpath folders question

[Ol Slow Hands]

I am programming a part that has 82 operations. It's the same basic 6 ops that are repeated on various part geometies. I saved and exported the operations and have been importing them over and over again. I noticed that after a while, some of the operations folders turn from yellow to gray. When I re-gen, they all go back to yellow, but as I add operations they go back to gray. Everything posts fine...

 

What does this mean?

[Guest]

I have had something similar happen.

 

They will turn grey and as soon as I pick one of them they seem to "come back"

 

I also get white squares around them sometimes.

 

I chalk these idiosyncrocies up to "video issues"

 

No harm, no foul.

[Roger Peterson]

are you using X+ chook to change the ops manager background color?

[Guest]

Roger,

 

I am, yes.

[Ol Slow Hands]

No ... I'm not. I'm using MCX MR2 - Router (5 axis)

[Mcam Nut]

I get the white blocks that is caused from the x+ I believe, it happens when i copy more then 1 operation at a time