Eternal filter

[PeterM]

I have a surface finish parallel toolpath which I would like to filter and there is no filter tab in the toolpath. In V9 there was an external filter available under options that would have served my purposes nicely, but I cannot find it in x. The filter nci chook seems useless, (I'll admit that this is the first time that I have tried to use it.) Any suggestions?

 

_____________________

Peter Martin

mcam 3... - x mr2 - mill level 3

Senior Programmer/Milling Supervisor

Preci Mfg.

400 Weaver St. Winooski VT 05468

PH# 802-655-2487 ext. 231

email [email protected]

[terry5357]

If "X" has NC utils try that. Don't have "X" but that seems logical

[beej]

the filter is in the "total tolerance" dialog box

[Thad]

quote:

---

I would like to filter and there is no filter tab in the toolpath.

---

Click the Total Tolerance button on the Finish Parallel Parameters page.

 

Thad

[PeterM]

Thanks guys, total tolerance = filter, now I have it. Peter