coolant not turning on

[polishman]

what gives ?I have coolant set to on in my operations but no M8 or M9 in the code.I didnt see any setting in my control def.

The only way to turn it on is through edit common parameters that works,but when you do that all the options go away(before.after ETC)

any ideas of what I'm doing wrong.I tried different post but it still didnt work.

Stan

[Guest]

Machine type >> machine def >> General machine parameters >> coolant commands

 

See if it is checked to support coolant values in the post processor.

 

 

Try checking or unchecking, which ever it may be and see if that helps

[polishman]

I checked the "support coolant using coolant value in post YA DA YA DA .....

That turned off all the coolant boxes in my operations.I an using a converted 9 post ,but I have the same problem with a generic post too.