g-code list

[[email protected]]

hi guys

 

 

where can i find different g-code lists for different systems and controls

 

thnx

[kinglouie V]

the machinist handbook is a good place to look

[Justin Beebe at Folsom Tool]

You can also search on the internet. In the search field try typing in the control type and "g-code list". Most g-codes are the same no matter what control you are using although their are also some specialty codes.

[[email protected]]

thanks guys i already knew that but i was woundering if i could find some thing new

[Guest]

Salem,

 

There is no single document that I am aware of that is comprehensive for all machines.

 

HAAS uses G code one way, Mori Seiki another, Fadal yet another way, Matsuura as well.

 

The standard code G00, G01, G02, G03, G04, though many machine tool builders will use these and many more code there are a ton of codes that are individual to machine makers.

 

My suggestion to you would be when you have a machine to program for that you are unfamiliar with, go to the machine builders website, many of them will offer a G code listing online. Read it an note the differences between machines you knw and you will likely see several differences.

[terry5357]

you can also go to the "information" area of this forum

[Colin Gilchrist]

Maybe one of the other Yemenesse will come to the rescue.....