psccomp

[Hymen]

Has anyone been able to get their comp output to be inside their plinout with feeds rather than in rapid moves in ltlchg$?

If so could you point me in the right direction? I've been trying for the last couple hours unsuccessfully.

example of current output:

code:

---

 (S16-SCLPR3-CPGM-32.51  INSERT - CPGM-32.51 INS-0010)

( BORE .015 VECTOR 2 )

G0 G40 G54 G99

G30 W0

G97 S1500 T0404 M3

/ G1 X1.569 F.9

G0 G41 X1.569

Z.05

M8

G1 Z-.001 F.01

X1.4923 Z-.0394

G40 X1.4641 Z-.0252

G0 G41 Z.0954

X1.5617

G1 Z-.0046

X1.49 Z-.0404

Z-.3628

G40 X1.4617 Z-.3486

G0 Z.03

M9

G0 G30 W0

M01

---

The guys here want it to look like this:

code:

---

 (S16-SCLPR3-CPGM-32.51  INSERT - CPGM-32.51 INS-0010)

( BORE .015 VECTOR 2 )

G0 G40 G54 G99

G30 W0

G97 S1500 T0404 M3

/ G1 X1.569 F.9

G0 X1.569

Z.05

M8

G1 G41 Z-.001 F.01

X1.4923 Z-.0394

G40 X1.4641 Z-.0252

G0 G41 Z.0954

X1.5617

G1 Z-.0046

X1.49 Z-.0404

Z-.3628

X1.4617 Z-.3486

G0 G40 Z.03

M9

G0 G30 W0

M01

---

[Hymen]

Is there a way to force psccomp?

[john316]

.

 

It should be in here. Do you want it in with the z-moves like that? You can move the pccdia to wherever you want it and take it out of where you don't.

 

plinout #Output to NC of linear movement - feed

pcan1, pbld, n$, sgfeed, sgplane, `sgcode, sgabsinc, pccdia,

pxout, pyout, pzout, pcout, `feed, strcantext, scoolant, e$