X2 post problems

[Mcam Nut]

My post is a modified mpmaster post and the problems I have found so far with it in x2 is I get a alarm rotary limits exceded, and manual entry with code selected comes out as a note(has brackets)

[Post dept]

Shawn,

 

We're aware of some of the issues with the mpmaster conversion from X to X2. I'll send you the customizable update post dll which will fix the problems you are describing. Just run your version X post through the X2 post update and all should be well!

 

I'll post on Jay's FTP shortly after.

 

Chris

[Mcam Nut]

My reseller has helped me out with the issues I am having, The only problem that I am aware of now is my post isnt reading my programmed spindle speed, every speed is the same (50000). but that is supost to be looked at early next week.

[mig]

Hi,Chris

I am also having problem with post converted from v9. I'm using X mr2 so far. Post work fine but slow. Is it normal for converted post?

[mig]

Anybody having same problem?

[Jon Griffin CNC Software]

This problem is caused by a bug that crept into the release. Bugs are dasterdly. CNC Software is currently working on a fix for it. I am under the impression that InHouse Solutions has a version of MpMaster which will compensate for the bug.

[Jon Griffin CNC Software]

To clarify, I was referring to McamNut's spindle speed problem. Appologies to any who were confused.

[Hymen]

In Lathe the feed from material didn't translate over well, at least on this machine.

All materials are set at 100 sfm and fpr of 50"

[Allan Brown]

New Mpmaster for X2 here:

 

http://www.emastercam.com/posts/mpmaster/mpmasterx2.html

 

includes a new customize_x.update_mill that will assist with updates of Mpmaster for X using the UpdatePost.dll util.