Analyze Dynamic X2

[rdshear]

Has anyone noticed that unlike in X, in X2 when using Analyze Dynamic you have to press escape to exit the function. In X, all you had to do was click the green check mark in the dialog box.

 

With X2, after the arrow is clicked, I still have to press escape to get rid of the "Select entities to analyze" message.

 

Is this a bug or just a change in the way it will operate now?

 

Rick

[Pete Rimkus from CNC Software Inc.]

Rick,

You're right - that's an unexpected change. I'll look into it.

[rdshear]

It seemed odd that dynamic was the only analyze function that required an escape to get out of.

 

Thanks for the response!

 

Rick

[rdshear]

Bump, still that way in MR1. Is there any way to check if this was ever looked into?

[Guest]

Read your what's new file and look at the bottom

[rdshear]

I didn't see it in the list. Does that mean it never got logged? If so, how do I go about logging problem?

 

Rick

[Guest]

Means it didn't get addressed if it has been logged.

 

Send it in to QC and see if it has been logged already

[Pete Rimkus from CNC Software Inc.]

I'll check it out here. I hope I didn't drop the ball on this.

[rdshear]

Thanks Pete. I'm sure you have plenty on your plate so if the ball was dropped no worries.

[Pete Rimkus from CNC Software Inc.]

Rick,

Yeah it's still in there.

I'll fix it today before it slips through the cracks in my brain...