Post Help Needed "Anilam"

[Sandybar]

I have a Anilam 3000 and would like to modify the post to accomadate tapping cycles.

 

It does everything just fine but will not code tapping cycles.

 

I need the code to look like the following.

 

TAPPING ZDEPTH -1.0 START HGT 0.100

TPI OR LEAD 20.000 SYNCSPIN YES

 

Anyone with experiece with Anilam tapping?

 

Thanks

[tgrammer]

I do not know but we just got an Anilam 3000 and would like to get the post. Can you help me with this?

 

Thanks

 

Tgrammer

[Guest]

quote:

---

I do not know but we just got an Anilam 3000 and would like to get the post. Can you help me with this?

---

[Zero]

quote:

---

I do not know but we just got an Anilam 3000 and would like to get the post. Can you help me with this?

---

the MPAN113X post that comes on MC install disc should work for you. Might need a little tweaking, but it should at least get you running

[tgrammer]

Thanks for the quick replys, I should have said I have one for G Codes but I would like one to post in conversational.

 

Thanks,

 

tgrammer

[Zero]

quote:

---

I have one for G Codes but I would like one to post in conversational

---

the mpan113x posts .m files in anilam conversational format. also, the controller itself has an option to convert gcodes to conversational, but ive not had much luck with it myself....

[Ray Edwards]

cant u edit your post to use canned taping cycles

[tgrammer]

Thanks the mpan113x post seems to work okay.

 

tgrammer