Convert part file from metric to english

[cncmstr1962]

I have a part drawn in metric

and I need to convert the entire part to

english units.

 

Help [email protected]

[crazy^millman]

Scale the part using 25.4 and that should take care of it for you.

 

HTH

 

Xform/Scale

[cncmstr1962]

there is a way to change the units in x2

[PERRY C]

You can also go to settings then configuration and down at the bottom of the window you'll curret and it's probably set on default metric change it to default english and click the check mark and it will ask you if you wat it to scale the current drawing click yes. and it's done.

[Cuda84]

Go to your settings>>configuration. At the bottom of your system configuration screen it says current. If you change this it prompts you (do you wish to scale the current part) say yes and all is done.

 

I would make a copy of the file before doing this. I just did it on a simple part and it worked great.

 

X2-MR1