Setup sheet

[metalcut]

How to create setup sheet based on nci

ex:

210.nci,Operation, Tool dia, 10.0 ,Rad. 0., Tool lenght 80 ,Max dept, Stock Allow , Comment.

220.nci,Operation, Tool dia, 6 ,Rad. 3.0, Tool lenght 80 ,Max dept, Stock Allow , Comment.

230.nci,Operation, Tool dia, 4 ,Rad. 2, Tool lenght 80 ,Max dept, Stock Allow , Comment.

[Wallace]

Modify file Mill.set (or Millm.set for metric)

[rsbeadle]

I have a set-up sheet I got from the forum FTP as new-mill.set that I edited to output:

 

Tool #, Tool name (from parameters page)

Spindle Speed, Feedrate, stock to leave(XY)

Max Z depth.

 

Output looks like this:

 

T13 3/4" TURBO MILL

SPINDLE SPEED-3400 FEEDRATE 60.0 STOCK TO LEAVE(XY)- 0.0

MAX Z DEPTH = -3.400

 

I can e-mail the file if you want or you can get it from the FTP in it's original form with many more outputs so that you can edit the ones you don't want out. All the outputs com from the NCI file.

[Ryeker]

Steve..

Could you email me a copy of your modified set up sheet please...?

 

[ 03-26-2002, 10:31 PM: Message edited by: Ryeker ]