Question about redundant feed moves

[ICT_Outkast]

Can someone help me with this? I know it doesn't make a hill of beans, but my operators are whining about the redundant feed moves. Is there any way to get the post to remove the extra feed moves where it is picking up lead ins and outs? I am running V9 MR0105 and using a modified MPLFAN.PST. We are, within the next week, upgrading to X, but would like to fix the issue now. Any help would be appreciated.

 

Here is what I am trying to do.

 

Is now this:

 

 

N3G0T0303

G0G40G80G90F.1

G96S600M03

G0G54X2.603Z-.032M08

G99G1X2.803F.012

X2.9795

X3.1795

G0Z0.

X3.26

G1X3.46

X3.697

X3.897

G0Z.05

 

Want this:

 

N3G0T0303

G0G40G80G90F.1

G96S600M03

G0G54X2.603Z-.032M08

G99G1X3.1795F.012

G0Z0.

X3.26

G1XX3.897

G0Z.05

[within a thou]

exstend your geometry and turn lead in and out off either that or get your operators a tissue why are they complaining about this? unless they are hand writing the program on the control what difference does the few extra lines of code make?

[doyleg]

it is a pain to see, but i think we have to live with it. if you don't want it you may have to extend original geometry unless someone has already figured this out. same as what within a thou said. it would be nice to have it without because my machines do not have alot of memory and i can't get them to dnc (older machines) so the size of the program is a hinderance.

[ICT_Outkast]

Thanks guys....Appreciate the help. And I agree, it doesn't make a bit of difference, other than program size.

 

Respects,

 

Jerry