Tool library(s)

[Scott Bond]

Good Morning

I have the new V9 ,am I am committed to set up the best default parameters I ever had. I picked up the new ISCAR catalogs on cd (PDF VERSION). Is there anyway to use this or any other brand of cutters in my mastercam's library for mill tools?

 

The result I am looking for is=========

 

For Mastercam to use the mill tool info in the catalog(s)For the tool list at the top of my program.With the part numbers for each tool.

 

If at the end of this thread I have no answer I will make a library(s) with this information. If anyone could use such a beast please post what you want here.

[cadcam]

PDG,We all ready do this in Lath.

I know there was talk for mill,Has there been any new thoughts that you know of, to implament this in mill?

[cadcam]

Scott can you put say a little of the info from the disc on the FTP or email so I can see the data layout.

[Scott Bond]

Hi J(s)

I sent a peice of it to your Email.

 

If I can use any part of this it will help.