HELP with anilam

[MCFELIX]

hello members i have question about how i can fix the g19 plane for a post of anilan machine my post is not posting g19 plane any help please

thankyou

 

Felix Ortega

[Zero]

I have a post for the anilam 3300 that should post out g18 and g19 moves. ill take a look at it tomorrow when i get to work and see if i can give you a hand sorting it out

[MCFELIX]

thankyou zero the control is anilam3000 my email is

[email protected]

[MCFELIX]

nobody have it this information

[Zero]

Felix, you got mail

[MCFELIX]

ok thankyou for the tips zero

[Josh T™]

If it's posting the actual G17/G18/G19 code in converstional format the machine doesn't like it...

 

Go from this

:code:

 

# Plane codes

sg17 G17 # XY plane code

sg19 G19 # YZ plane code

sg18 G18 # XZ plane code

sgplane # Workplane G code

 

 

to this:

:code:

 

sg17 "Plane XY" # XY plane code

sg19 "Plane YZ" # XZ plane code

sg18 "Plane XZ" # YZ plane code

sgplane # Workplane G code

 

Try this and see if it works. If it is not posting anything on the arc outputs try this:

 

Go from this:

:code:

 

# Plane codes

sg17 # XY plane code

sg19 # YZ plane code

sg18 # XZ plane code

sgplane # Workplane G code

 

 

to this:

:code:

 

sg17 "Plane XY" # XY plane code

sg19 "Plane YZ" # XZ plane code

sg18 "Plane XZ" # YZ plane code

sgplane # Workplane G code

 

 

HTH

[MCFELIX]

Thanyou joshua i will try later, i will letyou know